Thermo Scientific VF-F20-A, Operating Manual

Page: 25 / 240

2
•
Safety
Integral Fraction Collector FT (VF-F20-A) Operating Manual Page 25
2.3.5 General Residual Hazards
Pay attention to the following general residual hazards when working
with the device:
WARNING — Hazardous Substances
Solvents, mobile phases, samples, and reagents might contain toxic,
carcinogenic, mutagenic, infectious, or otherwise harmful substances.
The handling of these substances can pose health and safety risks.
•
Be sure that you know the properties of all substances that you are
using. Avoid exposure to harmful substances. If you have any doubt
about a substance, handle the substance as if it is potentially
harmful.
•
Wear personal protective equipment as required by the hazard and
follow good laboratory practice.
•
Reduce the volume of substances to the minimum volume required
for sample analysis.
•
Do not operate the device in a potentially flammable environment.
•
Avoid accumulation of harmful substances. Make sure that the
installation site is well ventilated.
•
Dispose of hazardous waste in an environmentally safe manner that
is consistent with local regulations. Follow a regulated, approved
waste disposal program.
WARNING — Biohazard
Biohazardous material, for example microorganisms, cell cultures,
tissues, body fluids, and other biological agents can transmit infectious
diseases. To avoid infections with these agents:
•
Assume that all biological substances are at least potentially
infectious.
•
Wear personal protective equipment as required by the hazard and
follow good laboratory practice.
•
Dispose of biohazardous waste in an environmentally safe manner
that is consistent with local regulations. Follow a regulated,
approved waste disposal program.