DE4 User Manual
125
www.terasic.com
June 20, 2018
FPGA Bit Stream:
DE4_Ethernet.sof
NIOS II Workspace: DE4_Simple_Socket_Server\DE4_Ethernet_<Ethernet Port
#>\software\simple_socket_server
Nios II IDE Project Compilation
Before you attempt to compile the reference design under Nios II IDE, make sure the project is
cleaned first from the ‘Project’ menu of Nios followed by ‘Clean’.
Demonstration Batch File
Demo Batch File Folder: DE4_Simple_Socket_Server\de4_<Stratix
device>_ethernet_test_batch\demo_batch_<Ethernet port #>
The demo batch file folders include the following files:
Batch File: de4_net.bat, de4_net_bashrc, open_telnet.bat
FPGA Configuration File:
DE4_Ethernet.sof
NIOS II Program: simple_socket_server.elf
Demonstration Setup
Make sure Quartus II and NIOS II are installed.
Power on DE4.
Connect USB cable to DE4. The PC will need to install the USB Blaster driver for the first time
use.
Execute the demo batch file “de4_net.bat” under the batch file folder, where the IP address and
port numbers are assigned as shown below in
Figure 5–16
.
Summary of Contents for ALTERA DE4
