Terasic ALTERA DE4 User Manual Download Page 106

Page: 106 / 159

DE4 User Manual

106

www.terasic.com

June 20, 2018

Chapter 5

Examples of Advanced

Demonstration

This chapter introduces several advanced designs that demonstrate Stratix IV GX features using the

DE4 board. The provided designs include the major features on board such as the SATA, HSMC,

Gigabit Ethernet, SD card, USB host and device, and DDR2. For each demonstration the Stratix IV

GX FPGA configuration file is provided, as well as full source code in Verilog HDL and C. All of

the associated files can be found in the

DE4_demonstrations\de4_<Stratix device>

folder from the

DE4 System CD

For each of demonstrations described in the following sections, we give the name of the project

directory for its files, which are sub-directories of the

DE4_demonstrations\de4_<Stratix_device>

folder.

USB (Universal Serial Bus) is a well-known communication standard used in many peripherals.

The DE4 board provides a complete USB solution for both host and device applications. In this

demonstration, USB host functions are implemented for USB mass-storage and Human-interface

devices (HIDs) including a USB-Mouse. The drivers of the above applications are implemented in

NIOS II C code. All high-speed, full-speed, and low-speed devices are supported in this

demonstration.

Figure 5–1

shows the hardware system block diagram of this demonstration. The system requires a

50 MHz clock provided from the board. The PLL generates a 100 MHz clock for NIOS II processor

and high-speed controllers, as well as a 10 MHz clock for low-speed peripherals such as buttons. A

custom-defined SOPC ISP1761 controller, developed by TERASIC, is used to connect the ISP1761

Summary of Contents for ALTERA DE4
































































































































































Search results

Summary of Contents for ALTERA DE4

Reviews:

Related manuals for ALTERA DE4

Brands by name

Popular brands

Terasic ALTERA DE4, User Manual

Search results

Summary of Contents for ALTERA DE4

Reviews:

Related manuals for ALTERA DE4

Brands by name

Popular brands