DE4 User Manual
145
www.terasic.com
June 20, 2018
cleaned first from the ‘Project’ menu of Nios followed by ‘Clean’.
Demonstration Batch File
Demo Batch File Folder: DE4_PowerMeasure\Demo_Batch
The demo batch file includes following files:
Batch File: test.bat, test_bashrc
FPGA Configure File: DE4_PowerMeasure.sof
NIOS II Program: DE4_PowerMeasure.elf
Demonstration Setup
Make sure Quartus II and NIOS II are installed on your PC.
Power on the DE4 board.
Connect USB Blaster to the DE4 board and install USB Blaster driver if necessary.
Execute the demo batch file “
test.bat
” under the batch file folder,
DE4_PowerMeasure\demo_batch
.
After NIOS II program is downloaded and executed successfully, a prompt message will be
displayed in nios2-terminal.
The program will display current power consumption information, as shown in
Figure 5–31
.
The information is updated every two seconds.
Summary of Contents for ALTERA DE4
