Teledyne ULTRAFLOW 150, Operation Manual, Page: 82 / 162

ULTRAFLOW 150 GAS FLOW AND TEMPERATURE MONITOR
(3) must always be used. See Section 6, Temp. Calibration Properties, for
additional details.
Standard Pressure Properties:

Standard Pressure Correction: ENABLE/DISABLE

Pressure at Point 1

Current at Point 1

Pressure at Point 2

Current at Point 2

Reference Pressure
Standard Temperature Properties:

Temperature Source: INTERNAL/EXTERNAL

Standard Temperature Corr: ENABLE/DISABLE

Temperature at Point 1

Current at Point 1

Temperature at Point 2

Current at Point 2

Reference Temperature
Alarm Properties:

Flow Alarm Selection: Actual Volume A
Standard Volume
A
Actual Volume B
Standard Volume
B
Actual Volume
AB
Standard Volume
AB

Flow Alarm Mode: LESSER/GREATER

Instantaneous Flow Alarm Threshold

Average Flow Alarm Threshold

Temp. Alarm Selection: Internal
Temperature A
Internal
Temperature B
Internal
Temperature AB
External
Temperature

Temp. Alarm Mode: LESSER/GREATER

Instantaneous Flow Alarm Threshold

Average Flow Alarm Threshold
Resolution Properties:

Time Between Transmits

Seconds per TD

Second per RAM Count
Gain Limits:

Minimum Analog Gain

Maximum Analog Gain
8-6