Teledyne T200, Operation Manual, Page: 377 / 425

Teledyne API - T200, T204 and 200E Series (05295F DCN6900)
Appendix A3: Warnings and Test Measurements, Software Version K.3
A-33
MODBUS Register
Address
(decimal, 0-based)
Description
10
Units
21
2
Triggers span calibration of NO
X
range #1 (on enters cal.; off exits cal.)
22
2
Triggers zero calibration of NO
X
range #2 (on enters cal.; off exits cal.)
23
2
Triggers span calibration of NO
X
range #2 (on enters cal.; off exits cal.)
1
Engineering firmware only.
2
Set
DYN_ZERO
or DYN_SPAN variables to ON to enable calculating new slope or offset. Otherwise
a calibration check is performed.
3
Triple-range option.
4
Optional.
5
O
2
option.
6
CO
2
option.
7
Concentration alarm option.
8
Low span option.
9
M200EUP.
10
All NO
X
references become NO
y
for M200EU_NO
y
.
11
M200EU and M200EU_NO
y
.
12
External analog input option.
13
M200EU_PHOTO.
14
O
3
option.
15
32-bit integer value stored in high/low word order (i.e. not a floating-point value).
06858E DCN7057