Teledyne T200, Operation Manual, Page: 167 / 425

Teledyne API
– T200 NO/NO
2
/NO
X
Analyzer Operation Manual Data Acquisition System (DAS) and APICOM
165
7.1.3.9. THE COMPACT REPORT FEATURE
When enabled, this option avoids unnecessary line breaks on all RS-232 reports. Instead
of reporting each parameter in one channel on a separate line, up to five parameters are
reported in one line.
The COMPACT DATA REPORT generally cannot be accessed from the standard
DAS front panel menu, but is available via the instrument‟s communication ports by
using APICOM or the analyzer‟s standard serial data protocol.
7.1.3.10. THE STARTING DATE FEATURE
This option allows the user to specify a starting date for any given channel when the user
wants to start data acquisition only after a certain time and date. If the
STARTING
DATE is in the past (the default condition), the DAS ignores this setting and begins
recording data as defined by the REPORT PERIOD setting.
The STARTING DATE generally cannot be accessed from the standard DAS front
panel menu, but is available via the instrument‟s communication ports by using
APICOM or the analyzer‟s standard serial data protocol.
7.1.3.11. DISABLING/ENABLING DATA CHANNELS
Data channels can be temporarily disabled, which can reduce the read/write wear on the
Disk-on-Module (DOM).
To disable a data channel, go to the DAS>EDIT menu as shown in Section 7.1.3 then
continue as follows:
Starting at the
EDIT CHANNEL MENU
SETUP X.X
0) CONC: ATIMER 5, 800
PREV NEXT INS DEL
EDIT
PRNT
EXIT
SETUP X.X
NAME: CONC
<SET SET>
EDIT PRNT EXIT
Continue pressing
<SET
or
SET>
until ...
SETUP X.X
CHANNEL ENABLE:ON
<SET SET>
EDIT
EXIT
Use the
PREV
and
NEXT
buttons to
scroll to the
DATA
CHANNEL
to be
edited.
SETUP X.X
CHANNEL ENABLE:ON
ON ENTR EXIT
EXIT
discards the new
setting.
ENTR
accepts the
new setting.
Toggle these buttons
to enable or disable
the
CHANNEL.
06858E DCN7057