Teledyne T200, Operation Manual, Page: 207 / 425

205
10.
EPA PROTOCOL CALIBRATION
For U.S. EPA compliance always calibrate this instrument prior to use, adhering to the
EPA designation conditions for operating this instrument (Section 2.2). Pay strict
attention to the built-in warning features, periodic inspection, regular zero/span checks,
regular test parameter evaluation for predictive diagnostics and data analysis, and
routine maintenance. Any instrument(s) supplying the zero air and span calibration
gasses used must themselves be calibrated and that calibration must be traceable to an
EPA/NIST primary standard.
Comply with Code of Federal Regulations, Title 40 (downloadable from the U.S.
Government Publishing Office at
http://www/gpo.gov/fdsys/ ) and with Quality
Assurance Guidance documents (available on the EPA website,
http://www.epa.gov/ttn/amtic/qalist.html ). Give special attention to specific regulations
regarding the use and operation of ambient NOx analyzers (chemiluminescence).
06858E DCN7057