Tektronix TCPA300 SERIES, Instruction Manual

Page: 78 / 205

Specifications
4- 6
TCPA300/400 Amplifiers and TCP300/400 Series Current Probes Instruction Manual
Table 4--7 lists the certifications and compliances for the amplifiers and probes.
Table 4- 7: Certifications and compliances
Category Standards or description
EC Declaration of Conformity --
EMC Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EN 61326 EMC requirements for Class A electrical equipment for
measurement, control and laboratory use.
1
IEC 61000--4--2 Electrostatic discharge immunity (Performance criterion B)
IEC 61000--4--3 RF electromagnetic field immunity (Performance criterion A)
IEC 61000--4--4 Electrical fast transient / burst immunity (Performance criterion B)
IEC 61000--4--5 Power line surge immunity (Performance criterion B)
IEC 61000--4--6 Conducted RF immunity (Performance criterion A)
IEC 61000--4--11 Voltage dips and interruptions immunity (Performance criterion B)
EN 61000--3--2 AC power line harmonic emissions
Australia / New Zealand
Declaration of Conformity Complies with EMC provision of Radiocommunications Act per the following standard(s):
Declaration of Conformity --
EMC
AS/NZS 2064.1/2 Industrial, Scientific, and Medical Equipment: 1992
EMC Compliance Meets the intent of Directive 89/336/EEC for Electromagnetic Compatibility when it is used with the
product(s) stated in the specifications table. Refer to the EMC specification published for the stated
products. May not meet the intent of the directive if used with other products.
FCC Compliance Emissions comply with FCC Code of Federal Regulations 47, Part 15, Subpart B, Class A Limits.
EC Declaration of Conformity --
Low Voltage
2
Compliance was demonstrated to the following specification as listed in the Official Journal of the
European Communities:
g
Low Voltage Directive 73/23/EEC, amended by 93/68/EEC
EN 61010-1/A2:1995 Safety requirements for electrical equipment for measurement
control and laboratory use.
EN 61010-2-032:1995 Particular requirements for hand-held current clamps for electrical
measurement and test equipment.
U.S. Nationally Recognized UL3111-1 Standard for electrical measuring and test equipment. y g
Testing Laboratory Listing
UL3111--2--032 Standard for hand-held current clamps for electrical measurement
and test.
Canadian Certification CAN/CSA C22.2 No. 1010.1 Safety requirements for electrical equipment for measurement,
control, and laboratory use.
CAN/CSA C22.2 No. 1010.2.032:1996
Particular requirements for hand-held probe assemblies for
electrical measurement and test equipment.
1
Emissions that exceed the levels required by this standard may occur when this equipment is connected to a test object.
2
The TCP305 and TCP312 Current Probes are exempt from the Low Voltage Directive and are not third-party listed.
However, they have been evaluated to applicable safety standards.