Tektronix DPO5000 Series Technical Reference Download Page 21

Page: 21 / 352

The MSO/DPO73304DX, MSO/DPO72504DX, and MSO/DPO72304DX instrument bandwidths
with BWE disabled are typical.

MSO/DPO73304DX

BW settings

Bandwidth

Sample rate

No BWE

DC to >33 GHz, typical

All

33 GHz BWE

DC to >33 GHz

100 GS/s

23 GHz BWE

DC to >23 GHz

50 GS/s

MSO/DPO72504DX

BW settings

Bandwidth

Sample rate

No BWE

DC to >25 GHz, typical

All

25 GHz BWE

DC to >25 GHz

100 GS/s

23 GHz BWE

DC to >23 GHz

50 GS/s

MSO/DPO72304DX

BW settings

Bandwidth

Sample rate

No BWE

DC to >23 GHz, typical

50, 100 GS/s

23 GHz BWE

DC to >23 GHz

50, 100 GS/s

Typical temperature derating
Frequency

TC, (dB/°C)

DC — 5 GHz

0.005 dB/°C

10 GHz

0.010 dB/°C

15 GHz

0.025 dB/°C

20 GHz

0.045 dB/°C

25 GHz

0.065 dB/°C

30 GHz

0.115 dB/°C

33 GHz

0.160 dB/°C

Analog bandwidth ≥4 GHz,

≤20 GHz models

DC 50 Ω coupling, full bandwidth, TCA-292mm or TCA-N adapter, operating ambient temperature
15 °C to 40 °C (59 °F to 104 °F).

Enhanced bandwidth only applies to full scale (FS) settings of 100 mV, 200 mV, 500 mV, 1 V, and
2.5 V. Enhanced bandwidth of 4 GHz, 6 GHz, and 8 GHz is only available at 25 GS/s and 50 GS/s.

Use the Temperature variation table to determine the amount of performance derating above the
temperature limit.

Vertical system analog channels (cont.) Specifications (MSO70000C/DX, DPO70000C/DX, and DPO7000C

series)

MSO70000C/DX, DPO70000C/DX, DPO7000C, MSO5000/B, DPO5000/B Series

Summary of Contents for DPO5000 Series

































































































































































































































































































































































Search results

Summary of Contents for DPO5000 Series

Reviews:

Related manuals for DPO5000 Series

Brands by name

Popular brands

Tektronix DPO5000 Series, Technical Reference

Search results

Summary of Contents for DPO5000 Series

Reviews:

Related manuals for DPO5000 Series

Brands by name

Popular brands