Tektronix DPO5000 Series Technical Reference Download

Page: 233 / 352

2. Confirm input channels are within limits for offset accuracy

. Do the

following substeps - test Ch 1 first,

skipping substep

2.a

since Ch 1 is already

selected from step

a. Select an unchecked channel:

■

From the tool bar, touch

Measure

and then

Clear All

to remove the

previous measurement.

■

Press the Vertical button of the channel just confirmed to remove the
channel from the display.

■

Press the front-panel Vertical button that corresponds to the channel
you are to confirm.

■

Set the generator output to 0 V.

■

Move the test hookup to the channel you selected.

b. Turn on the measurement Mean for the channel:

■

From the tool bar, touch

Measure

and select the

Ampl

tab,

More

and then touch

Mean

to measure the mean of the current channel.

■

Press the

(Close) button.

c. Set the vertical scale:

Set the vertical

Scale

to one of the settings in the

following table that is not yet checked.

Table 10: Offset accuracy

Scale setting

Position setting
(Divs)

Offset setting

Termination
setting

Generator
setting

Accuracy limits

6.25 mV

0 V

–3.13 mV to +3.25 mV

+3.4 V

+3.5 V

+3.4 V

+3.3831 V to +3.4169 V

-3.4 V

-3.5 V

-3.4 V

–3.4169 V to –3.3831 V

10 mV

0 V

–3.5 mV to +3.5 mV

+3.4 V

+3.5 V

+3.4 V

+3.3827 V to +3.4173 V

-3.4 V

-3.5 V

-3.4 V

–3.4173 V to –3.3827 V

20 mV

0 V

–4.5 mV to +4.5 mV

+3.4 V

+3.5 V

+3.4 V

+3.3817 V to +3.4183 V

-3.4 V

-3.5 V

-3.4 V

–3.4183 V to –3.3817 V

50 mV

0 V

–7.5 mV to +7.5 mV

+3.4 V

+3.5 V

+3.4 V

+3.3787 V to +3.4213 V

-3.4 V

-3.5 V

-3.4 V

–3.4213 V to –3.3787 V

100 mV

0 V

–12.5 mV to +12.5 mV

+3.4 V

+3.5 V

+3.4 V

+3.3737 V to +3.4263 V

-3.4 V

-3.5 V

-3.4 V

–3.4263 V to –3.3737 V

Set as precisely as the instrument's offset resolution permits.

Performance verification (MSO/DPO70000C, MSO/DPO70000DX, and DPO7000C series)

MSO70000C/DX, DPO70000C/DX, DPO7000C, MSO5000/B, DPO5000/B Series

221

Summary of Contents for DPO5000 Series

































































































































































































































































































































































Search results

Summary of Contents for DPO5000 Series

Reviews:

Related manuals for DPO5000 Series

Brands by name

Popular brands

Tektronix DPO5000 Series, Technical Reference

Search results

Summary of Contents for DPO5000 Series

Reviews:

Related manuals for DPO5000 Series

Brands by name

Popular brands