Tektronix DPO5000 Series Technical Reference Download Page 20

Page: 20 / 352

<4 GHz models, 50 Ω coupling SCALE range

Offset range

1 mV/div to 50 mV/div

±1.0 V

50.5 mV/div to 99.5 mV/div

±1.5 V - 10 divisions

100 mV/div to 500 mV/div

±10 V

505 mV/div to 1 V/div

±15 V - 10 divisions

<4 GHz models, 1 MΩ
coupling

SCALE range

Offset range

1 mV/div to 50 mV/div

±1 V

50.5 mV/div to 99.5 mV/div

±1.5 V - 10 divisions

100 mV/div to 500 mV/div

±10 V

505 mV/div to 995 mV/div

±15 V - 10 divisions

1.0 V/div to 5 V/div

±100 V

5.05 V/div to 10 V/div

±150 V - 10 divisions

Offset accuracy

Net offset = offset - (position × volts/division).

>20 GHz models

Full scale voltage range

Offset accuracy

62.5 mV

to 1.2 V

±(0.4% | net offset | + 0.2% | net offset – Vterm
setting | + 2.5 mV + 1% Full Scale)

>1.2 V

to 6 V

±(0.6% | net offset | + 13.4 mV + 1% Full Scale)

≥4 GHz, ≤20 GHz models

SCALE range

Offset accuracy

Temperature variation

10 mV/div to 99.5 mV/div

±(0.35% × | net offset | +
1.5 mV + 1% x Full Scale)

100 mV/div to 0.5 V/div

±(0.35% × | net offset | +
7.5 mV + 1% x Full Scale)

±(0.45% × | offset | /°C)

<4 GHz models

SCALE range

Offset accuracy

1 mV/div to 9.95 mV/div

±(0.2% × | net offset | + 1.5 mV + 0.1 div × V/div
setting)

10 mV/div to 99.5 mV/div

±(0.35% × | net offset | + 1.5 mV + 0.1 div × V/
div setting)

100 mV/div to 1 V/div

±(0.35% × | net offset | + 15 mV + 0.1 div × V/
div setting)

1.01 V/div to 10 V/div

±(0.25% × | net offset | + 150 mV + 0.1 div
× V/div setting)

Analog bandwidth >20 GHz

models

Bandwidth with a TCA292D adapter.

Operating ambient temperature <30 °C. Use the Temperature variation table to determine the
amount of performance derating above the temperature limit.

Enhanced bandwidth only applies to full scale (FS) stepped gain settings of 62.5 mV, 100 mV,
200 mV, 500 mV, 1 V, 2 V, and 5 V.

Specifications (MSO70000C/DX, DPO70000C/DX, and DPO7000C series) Vertical system analog channels
(cont.)

MSO70000C/DX, DPO70000C/DX, DPO7000C, MSO5000/B, DPO5000/B Series

Summary of Contents for DPO5000 Series

































































































































































































































































































































































Search results

Summary of Contents for DPO5000 Series

Reviews:

Related manuals for DPO5000 Series

Brands by name

Popular brands

Tektronix DPO5000 Series, Technical Reference

Search results

Summary of Contents for DPO5000 Series

Reviews:

Related manuals for DPO5000 Series

Brands by name

Popular brands