48
TANDBERG
FieldView Administrator Guide
D14098.02 June 2008
Tap the
Search
button to locate the update. If the update is found, the button
will change to a
Download
button.
Tap the
Download
button to copy the software update from the source
location. Note that any component with a version that does not match the
installed version is considered new and may be updated. If several versions
are available from the download source, only the highest numbered version is
displayed.
Once the download is complete, the
Download
button will change to an
Install
button. Tap the
Install
button to complete the software update.
The device will be automatically restarted after the update completes.
TANDBERG FieldView Application Updates
Install software updates for the TANDBERG FieldView Application following the
installation instructions provided in
TANDBERG FieldView Application Installation
or the instructions provided with the update. Uninstalling a previous version is
not necessary unless you are directed to do so in the update instructions.
Note:
Snapshots, recordings, contacts, users and software license are all
preserved during a software update.
Batteries
The TANDBERG FieldView Device battery tracks its current charge level and
condition. Lithium-ion batteries age with repeated use, resulting in reduced
capacity. When battery life is reduced to unacceptable levels, the battery
should be replaced.
An external battery charger is available that will charge and condition the
battery. Conditioning synchronizes the true charge level of the battery with its
reported value. The battery charger will also detect malfunctioning batteries.
Refer to the
TANDBERG FieldView Device External Charger User Manual
for
operating instructions and specifications.
Battery Removal
Warning
Always turn off the TANDBERG FieldView Device
before removing the battery.
Failure to do so may permanently damage
the TANDBERG FieldView Device.
Refer to the
TANDBERG FieldView Device Users Manual
for instructions on
removing the battery.
Improving Battery Life
TANDBERG FieldView Device battery life can be improved by:
Placing the TANDBERG FieldView Device in Standby when it is not being used
•
for short periods of time. (The TANDBERG FieldView Device will still receive
incoming calls in Standby.) The Standby timer can be set to do this automatically
Turning off the TANDBERG FieldView Device whenever it is not being used and it
•
does not need to be available to accept incoming calls
Lowering the viewfinder backlight brightness level. The default setting for the
•
Chapter 8
