22
TANDBERG
FieldView Administrator Guide
D14098.02 June 2008
Display>Backlight
Backlight power save checkbox.
Check
Backlight
power save
to set the
backlight to the lowest level to save power.
You can manually set the backlight to its lowest power by holding the
Display
Mode
button for 2 seconds. Press and hold the
Display Mode
button a second
time to restore the backlight level to the previous setting.
Viewfinder backlight brightness control.
You can choose from four levels
of backlight brightness adjustment.
Video
Video>Color
Brightness/Hue/Saturation/Contrast/Sharpness sliders.
Adjust these
sliders to modify the camera module image parameters.
Defaults button.
Tap
Defaults
to restore video brightness, hue, saturation,
contrast and sharpness to the default values.
White Balance.
Select the proper white balance for different lighting
conditions.
Auto:
Continuous adjustment for lighting conditions from 3000K to 7500K
Indoor:
Tungsten lighting
Outdoor:
Sunlight
One Push:
Manual calibration. Follow the onscreen instructions to calibrate the
white balance using a white reference object.
Auto Tracing:
Continuous adjustment for lighting conditions from 2000K to
10000K
Preview Display
The preview display permits monitoring the changes made on the
Color
page.
Video>Source
Video Source.
Choose a video source of either the internal camera module or
an external video source via the S-Video input connector.
When using an external video source, select the appropriate video type.
Usually the video type is
NTSC
for North American equipment and
PAL
for
European equipment.
Fig. 4-15 Display>Backlight Configuration Page
Fig. 4-16 Video>Color Configuration Page
Fig. 4-17 Video> Source Configuration Page
Chapter 4
