35
TANDBERG
FieldView Administrator Guide
D14098.02 June 2008
Connections Window
Default Views.
Choose how the TANDBERG FieldView Application displays
each window. The options are:
Details (default)
•
Tile
•
Small icons
•
Large Icons
•
List
•
Initial Connection State.
Choose the initial connection state of TANDBERG
FieldView Application. The options are:
Online
•
Do Not Disturb
•
Offline
•
Call Window
Start video on connection.
Check to automatically start video streaming
when a call initially connects. The default is ‘unchecked’.
Fit video to window.
Check to automatically scale the video image to fit the
TANDBERG FieldView Application window. The default is ‘unchecked’.
Configuration.
Choose the default media configuration to use for a call. Any
configuration under
File > Media Configurations
can be used that matches
the PAL/NTSC capabilities of your TANDBERG FieldView Device model.
Prefer low bandwidth voice codec.
Check to indicate a preference to use a
low bandwidth audio codec. This is helpful if you wish to minimize the amount
of bandwidth used by voice.
Prefer low bandwidth subject audio codec.
Check to indicate a preference
to use a low bandwidth audio codec. This is helpful if you wish to minimize the
amount of bandwidth used by subject audio.
Annotate when taken.
Check to have the Annotation window appear
immediately after taking a snapshot. The default is ‘checked’.
Use UDP instead of TCP.
TCP is used by default for SIP messaging to a SIP
proxy. Check to use UDP instead for SIP messaging if your SIP proxy requires
this for compatibility.
Fig. 5-2 FA Configuration—Connections
Window tab
Fig. 5-3 FA Configuration—Call Window tab
Chapter 5
