28
TANDBERG
FieldView Administrator Guide
D14098.02 June 2008
Network>Radio
Enable Radio.
Select to enable the radio. When disabled, wireless network
communication is not available. When wireless networking is not required,
disable the radio to save power.
Allow anyone to enable/disable radio (Admin only).
Check if non-
administrative users are allowed to enable or disable the radio. This checkbox
does not appear for non-administrative users
Scan all available channels.
Check to automatically scan all channels.
Customize scan channels.
Select the 802.11b/g radio channels which will
be scanned. These should match the access points you will be operating with.
Access points operating on other channels will not be scanned.
In France the permitted channels are only in the range of 1 to 7 when
operating outdoors.
Note:
Limiting the channels that are selected will improve roaming
performance by speeding switching and reducing the possibility of dropouts. If
you don’t know which channels are in use at a given site, enable all channels.
Network>SNMP
The SNMP configuration screens allows configuration of the TANDBERG
FieldView Device to be managed by the FieldView FieldView Management Suite
(FMS). Consult the FMS User Manual for information on configuring these
settings.
Security
Security>Login
The options in this window configure the User Authentication window. The User
Authentication window appears:
When the TANDBERG FieldView Device powers up
•
After a user logs out
•
When resuming from standby (if enabled)
•
Auto Login
If an TANDBERG FieldView Device is dedicated to an individual, their Username
and Password can be entered here to speed up login.
See
Chapter
7. User and Contact Management and Distribution
for information on
creating Local User accounts
Service:
None=request manual entry of Username/Password
Local=use Username/Password shown
Username:
Username of individual. Must exist in
LocalRegistrationService.
xml
.
Password:
Password of individual. Must exist in
LocalRegistrationService.xml
.
Fig. 4-32 Network>Radio Configuration
Page
Fig. 4-33 Security>Login Configuration Page
Chapter 4
