34
TANDBERG
FieldView Administrator Guide
D14098.02 June 2008
5. TANDBERG FieldView Application
Configuration
The TANDBERG FieldView Application is described in other sections of this
manual and in the TANDBERG FieldView Application User Guide. Refer to the
following sources as needed:
Installation and general operation of the TANDBERG FieldView Application,
•
see the TANDBERG FieldView Application User Guide.
Installation of TANDBERG FieldView Application via FMS, see the FieldView
•
Management SuiteUser Guide.
Enterprise license management, see FieldView Enterprise Suite User Guide.
•
Media configuration, see
•
Chapter 6. Media Configuratio
n
.
User and Contact Management, see
•
Chapter 7
of this manual
This chapter provides addition information on how to configure the TANDBERG
FieldView Application preferences and the TANDBERG FieldView Application file
locations.
Preferences Configuration
Startup
The options in the Startup window configure the Login window which appears
when the TANDBERG FieldView Application is launched.
Auto Login
If an TANDBERG FieldView Application/PC is dedicated to an individual, you
may enter their User Name and Password to automate the login sequence. See
Chapter 7
for information on creating Local User accounts.
Service:
None: manual entry of User Name and Password during login
Local: use User Name and Password shown
User Name:
Username of individual. Must exist in the Local User list i.e.
LocalRegistrationService.xml.
Password:
Password of individual. Must exist in
LocalRegistrationService.xml.
Run at Windows startup?
Check to start the TANDBERG FieldView Application automatically at Windows
startup.
Fig. 5-1 FA Configuration—Startup tab
Chapter 5
