Operating the Equipment Locally
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
Page 3-37
ST.TM.E10033.3
Table 3.8: System Control Options
Selected Option
Description
SCPC
Single Channel Per Carrier.
MCPC
Multiple Channels Per Carrier.
SI Information Option
To access the SI Information option, press the SI Information softkey in
the
Service Info Menu
. This enables the inclusion of Program System
Information Protocol (PSIP) in the output transport stream to be switched
on or off. Use the + and – softkeys to alternate between On and Off and
then press the Enter softkey after selecting one of them.
Setup/System/SI Edit
Setup Information
+
On
—
Enter
Update using softkeys
Quit
Syntax Option
To access the Syntax option, press the Syntax softkey in the
Service
Info Menu
. This enables the syntax to be specified. Use the + and –
softkeys to scroll through the options and then press the Enter softkey
after selecting one of them.
Setup/System/SI Edit
Syntax
+
DVB
—
Enter
Update using softkeys
Quit
NOTE…
On the E5500 MCE, DVB should normally be selected at the Syntax option. ATSC menus are
available, however, although not used.
Table 3.9: Syntax Options
Selected Option
Description
ATSC
Advanced Television Standards Committee.
DVB
Digital Video Broadcasting.
SI Deliv Desc Option
To access the SI Deliv Desc option, press the SI Deliv Desc softkey in the
Service Info Menu
. This enables the SI delivery descriptor to be
specified.
