Predefined User Configurations
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
Page D-3
ST.TM.E10033.3
D.1
Introduction
There are sixteen predefined user configurations. These are a quick and
easy way to configure the MCE without having to enter individual
parameters.
D.2
General Default Settings
The MCE default parameters settings are as shown in Table D.1.
Table D.1: Default Configuration Settings
Module
Parameter
Value
System:
Service Information
On
Encoder Number
1
Network Name
Tandberg Network
Service Name
Default Service
Network ID
0xFFFF
Service ID
0x0001
Transport Stream ID
0x0001
Setup Password
OFF
Mux:
On Air
ON
Mode
ASI
Clock
Local Oscillator
Lock Local to Remote PCR
Off
PCR Timing Interval
40 ms
PCR PID
0x1FFE
ASI Bit-rate
40 Mbit/s
TAXI Port
A
Video Preprocessor:
Teletext PID
0x111
Teletext
On
Video Input
Enabled
Output on Video Loss
Freeze Frame
Closed Caption
On
Pan Scan Flags
Enabled
WSS
On
VPS
On
Logo
Off
Audio DID Extractors
Auto
Video Encoder:
Control Mode
Auto
Bit-rate
8 Mbit/s
GOP Structure
IBBP
GOP Length
12
Encode
On
PCR Source
Motherboard
Field/Frame Picture
Frame
