Installing the Equipment
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
Page 2-13
ST.TM.E10033.3
HSYNC IN
A 75
Ω
BNC connector provides a timing
reference to the unit. The timing
reference is fed to HSYNC IN from the
studio black/burst signal.
Table 2.3: HSYNC IN Connector
Pin
Signal
Centre
Video Input
Screen
Ground
2.5.3
Audio Inputs
Audio
A 15-way, D-type male connector
provides an audio channel which may be
used as 4 channels of analogue audio for
configuration as 4 mono or 2 stereo audio
pairs analogue, or by selecting digital
audio can operate as digital AES/EBU
audio on left channel only. The right
channel can be configured to output a
reference AES/EBU signal for an external
Dolby AC-3 encoder.
The MCE is supplied with a ‘break out cable’ (part number RD.C.MSC1011)
which plugs into this connector, and provides a more convenient means of
connecting the audio inputs via four XLR female connectors.
Audio embedded on the SDI digital input can also be extracted and
encoded (see Table 2.2 for pinout details).
Table 2.4: Audio Input Connector
Analogue Input
AES/EBU Digital Input
Pin
Signal
Pin
Signal
Pin
Signal
Pin
Signal
1
L A (+)
9
L A (-)
1
AES A (+)
9
AES A (-)
2
L A screen
10
R A (+)
2
AES A screen
10
AES OP A (+)
3
R A (-)
11
R A screen
3
AES OP A (-)
11
AES A screen
4
L B (+)
12
L B (-)
4
AES B (+)
12
AES B (-)
5
L B screen
13
R B (+)
5
AES B screen
13
AES OP B (+)
6
R B (-)
14
R B screen
6
AES OP B (-)
14
AES B screen
7
Not connected
15
Not connected
7
Not connected
15
Not connected
8
Chassis ground
8
Chassis ground
NOTE…
In analogue mode termination is either 20 k
τ
or 600
τ
.
In AES/EBU mode termination in 110
τ
.
