Operating the Equipment Locally
Page 3-106
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
ST.TM.E10033.3
If the specified bit-rate is outside the valid input range, a confirmation
screen is displayed which shows the maximum/minimum value allowed.
Press the Enter softkey to accept the new value shown, or press the Quit
softkey to leave the original bit-rate unchanged.
Confirmation Screen
Host Bit-rate (204)
Specified Value Too High
Select <Enter> to Set to
Enter
Maximum : 55.9999 Mbit/s
Quit
Packet Length Option
To change the packet length, press the Packet Length softkey in the
Host Menu
.
Use the + and – softkeys to scroll through the choices and then press the
Enter softkey after selecting one of them.
Setup/Mux/Host Edit
Packet Length
+
188 bytes
—
Enter
Update using softkeys
Quit
Table 3.89: Packet Length Options
Selected Option
Description
188 bytes
Uses 188 bytes packet format.
204 bytes
Uses 204 bytes packet format.
Services
Selection
The
Services Menu
is selected from the
Mux
Menu
by pressing the
Services softkey.
This menu provides options for setting the Services parameters.
Setup/Mux/Services Menu
O / P R a te (1 8 8)
2 8 . 92 0 9 M bi t /s
*
S p a re Bi t R a te
4 1 . 47 0 6 M bi t /s
ê
PgDn
I n p ut Bi t R a te
*
O u t pu t B i t R at e
Quit
These options cannot be changed.
