Equipment Description
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
Page 4-15
ST.TM.E10033.3
Function of Remultiplexer
It is the function of the Remultiplexer to combine the locally generated
host services with the externally supplied input services, connected via ASI
to the rear of the unit. By doing so the Remultiplexer will automatically
remap PIDs if they clash. Service names that clash will also be
automatically remapped and timestamps adjusted if necessary.
A block diagram is provided, see Figure 4.6.
Figure 4.6: Remultiplexer Block Diagram
Using the Remultiplexer
The user should connect DVB transport streams that are to be combined
(remultiplexed) to the ASI inputs on the rear of the unit (DVB ASI IN 1, 2
and 3).
NOTE…
At the time of publication, only transport streams generated by TANDBERG Television equipment are
guaranteed to work when fed to the Remultiplexing Module.
The equipment will automatically detect the services on these inputs and
combine them into the output stream. The service names of the detected
and combined services will then appear in the service list. (This can be
viewed using the
Setup/Mux/Services
menu).
Dual Port
Ram
IF Output
Remux
ASI
Input
Modulator
QPSK
R
e
mult
ipl
e
xer
Video
Video
Encoder
Audio
Encoder
Audio
Host Mux
Host
Mux
Rate
Remux
ASI
Input
Remux
ASI
Input
Output
Bit-rate
