Operating the Equipment Locally
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
Page 3-109
ST.TM.E10033.3
Default Service Option
To change the Default Service option, press the appropriate Default
Service softkey in the
Services Menu
.
Use the + and – softkeys to alternate between On and Off and then press
the Enter softkey after selecting one of them.
Setup/Mux/Services Edit
Default Service
+
(1) On
—
Enter
Update using softkeys
Quit
3.10
Status Menu
The Status Menu shows the current parameter settings of the MCE. Refer
to Figures 3.9 to 3.13 for the structure of the Status Menu. The screens
can only be viewed, data cannot be changed.
3.11
Errors
There is no formal menu structure associated with this option but if there
are errors associated with the equipment then a screen is shown which
indicates the error category (alarm/fail), the module affected and text
describing the error. Refer to Annex C for further details of error
messages. When there are no errors, the words ‘There are no errors’ are
shown.
3.12
Diagnostics Menu
3.12.1
Menu Options
Selection
The
Diagnostics
Menu
is selected from the
Top Level Menu
by pressing
the Diagnostics softkey.
This menu has a selection of diagnostic tests which allow the operator to
test the equipment, either as a whole or by the individual component
parts.
Diagnostics
All Modules
Individual Modules
Front Panel
Quit
The number changes according to the default service.
