Operating the Equipment Locally
Page 3-32
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
ST.TM.E10033.3
Setup/System/Config/Store
O v e r- w ri t e w hi c h C on f ig ?
1: Auto 2 Mbit/s
*
2: Auto 4 Mbit/s
PgDn
3: Auto 6 Mbit/s
4: Auto 8 Mbit/s
Quit
Load Cfgs From Backup Option
This option enables the 16 user configurations to be overwritten with the
protected backup configurations. To update a backup configuration, press
the Load Cfgs From Backup softkey in the
Config
Menu
and enter the
password to allow access. (On the MCE the default password is normally
123456789)
Press the Yes softkey to restore the backup configurations, or the No
softkey to return to the menu and keep the current configurations.
NOTE…
The current MCE configuration remains unchanged.
Setup/System/Config/RstrBack
This will erase all current
Yes
configs.
No
Are you sure?
Quit
Store Cfgs in Backup Option
This enables the 16 user configurations to be stored in the backup, and is
password protected. Press the Store Cfgs in Backup softkey in the
Config
Menu
,
enter the password and then press the Enter softkey.
Setup/System/Config/UpdDefs
Enter password using keypad
Del
Case
Enter
(Upper case)
Quit
As the configurations are being saved to the backup (this takes only a
second or two), the following screen is displayed.
Setup/System/Config/UpdDefs
S t o ri n g C on f ig s i n B a ck u p
P l e as e w a it .. . ..
Scrolls down to show
default configurations
1 to 16.
