Technical Specification
Page B-12
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
ST.TM.E10033.3
Table B.19: IF OUT MONITOR Specification
Item
Specification
Safety status:
SELV
Connector designation:
IF OUT MONITOR
Connector type:
BNC, female 75
Ω
Output impedance:
75
Ω
Output power:
−
20 dB
±
2 dB referenced to the main IF output
(IF OUT MAIN)
Return loss:
> 20 dB, 35 < f < 105 MHz
Main/monitor output isolation:
(both directions)
>30 dB, 35 < f < 105 MHz
B.9.4
RAS Scrambling Module (S8489)
Table B.20: DVB ASI 1, 2 and 3 Specification
Item
Specification
Safety status:
SELV
Connector type:
BNC 75
Ω
Connector designation:
DVB ASI 1, DVB ASI 2, DVB ASI 3
B.9.5
Internal Remux Module (S10655)
Connectors
Table B.21: DVB ASI IN 1, 2 and 3 Connector
Item
Specification
Safety status
SELV
Connector designation
DVB ASI IN 1, DVB ASI IN 2, DVB ASI IN 3
Connector type
BNC
Connector Impedance
75
Ω
4
Data coding
8B/10B
Channel rate
270 Mbit/s
Specification
DVB A010 rev 1 (Asynchronous Serial Interface)
5
4
75
Ω
terminator must be fitted when this connector is not in use.
5
Byte mode and single packet burst mode only.
