Operating the Equipment Locally
Page 3-70
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
ST.TM.E10033.3
Source Option
To access the Source option, press the Source softkey in the
Channel 1A
Menu
. Use the + and – softkeys to scroll through the choices and then
press the Enter softkey after selecting one of them.
Setup/Audio 1A Edit
Audio Source
+
Analogue
—
Enter
Update using softkeys
Quit
Table 3.42: Source Options
Selected Option
Description
Off
No audio packets are sent in the transport stream and audio is removed from
the Service Information (SI).
Mute
Empty audio packets are sent in the transport stream.
Test Tone
The internal test tone is used as the audio source.
Analogue
Analogue audio input on AUDIO IN connector.
Digital 1
Digital audio input 1 on AUDIO IN connector.
Digital 2
Digital audio input 2 on AUDIO IN connector.
Embedded 1
Digital audio de-embedded from digital video input using DID 0x2FF.
Embedded 2
Digital audio de-embedded from digital video input using DID 0x1FD.
Embedded 3
Digital audio de-embedded from digital video input using DID 0x1FB.
Embedded 4
Digital audio de-embedded from digital video input using DID 0x2F9.
Audio Bit-rate Option
To access the Audio Bit-rate option, press the Audio Bit-rate softkey in
the
Channel 1A Menu
. Use the + and – softkeys to scroll through the
choices and then press the Enter softkey after selecting one of them.
Setup/Audio 1A Edit
Audio Bit-rate
+
384 kbit/s
—
Enter
Update using softkeys
Quit
