Technical Specification
Page B-6
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
ST.TM.E10033.3
B.3.5
Remote Control In
This connector provides an RS-485 user interface control port which allows
the unit to be controlled by an external master. Table as Table B.8 but
connector designation is REMOTE CONTROL IN.
B.3.6
Remote Control out
This connector allows the encoder to control an external modulator and/or
IRD. Table as per B.3.4 but connector designation is REMOTE CONTROL
OUT.
B.4
Test Tone
Table B.9: Test Tone Specification
Item
Specification
Frequency:
1 kHz at 48 kHz sampling frequency
Level:
6.87 dB at 18 dB system gain
B.5
Power Supply
This equipment is fitted with a wide-ranging power supply. It is suitable for
supply voltages of 100-120 Vac -10% +6% or 220-240 Vac -10% +6% at
50/60 Hz nominal.
Table B.10: AC Power Supply Specification
Item
Specification
Power distribution system:
Type TN ONLY (EN 60950 para 1.2.12.1): Power distribution system
having one point directly earthed, the exposed conductive parts of the
installation being connected to that point by protective earth
conductors. This equipment must NOT be used with single-phase
three-wire
and PE, TT or IT Type Power distribution systems.
Connection to supply:
Pluggable Equipment Type A (EN 60950 para 1.2.5): Equipment which
is intended for connection to the building power supply wiring via a
non-industrial plug and socket-outlet or a non-industrial appliance
coupler or both. Correct mains polarity must always be observed. Do
not use reversible plugs with this equipment.
Class of equipment:
Class
I
Equipment (EN 60950 para 1.2.4): electric shock protection by
basic insulation and protective earth.
Rated voltage:
100-120/220-240 Vac
(single phase)
Rated frequency:
50/60 Hz
Voltage selection:
Wide-ranging
Rated current:
4 A (100-120 Vac range)
2 A (220-240 Vac range)
Input connector:
CEE 22/IEC 320 3-pin male receptacle
Fuse:
Fuse in live conductor in power input filter at rear of unit. Do not use
reversible plugs with this equipment.
Fuse type: 5 x 20 mm
IEC127 Sheet V e.g.:
Bussmann S505 series
Littelfuse 215 series
Fuse current rating:
5 A 250 V T HBC
PSU Power Consumption:
250 W maximum
