Operating the Equipment Locally
Instruction Manual: evolution 5000 E5500 Mobile Contribution Encoder
Page 3-81
ST.TM.E10033.3
Setup/Audio 1A Edit
Low Pass Filter
+
On
—
Enter
Update using softkeys
Quit
Table 3.60: Low Pass Filter Options
Selected Option
Description
On
A low pass filter is selected.
Off
A low pass filter is not selected.
Embedded Src 12 Option
To access the Embedded Src 12 option, press the Embedded Src 12
softkey in the
Channel 1A Menu
. Use the + and – softkeys to scroll
through the choices and then press the Enter softkey after selecting one
of them.
Setup/Audio 1A Edit
Embedded Audio Source 1 - 2
+
Auto (2048)
—
Enter
Update using keypad or softkeys
Quit
Table 3.61: Embedded Src 12 Options
Selected Option
Description
Auto (2048)
Embedded Src 34 Option
The Embedded Src 34 option is selected from the
Channel 1A Menu
by
pressing the Embedded Src 34 softkey. The Embedded Src 34 option has
the same choices as the Embedded Src 12 option.
Audio PID Option (V3.3 on)
The Audio PID option is selected from the
Channel 1A Menu
by pressing
the Audio PID softkey. The option is used for entering or updating audio
PIDs, as required. Enter a two to four digit code using the keypad, then
press the Enter softkey to enter the PID.
NOTE…
Allocating PIDs - to be DVB compliant, PIDs below 32 are reserved. Therefore PIDs 32 to 8191 are
available for use. In the event of a clash, one of the PIDs will be changed by the MCE’s internal
checking algorithm.
