background image

A P P E N D I X   H                                                                                                                                               2 1 5

Home and home office wiring options prior to adding TalkSwitch

All phones are connected together in a single loop (or in multiple loops)

The phones are all wired to Line 1. If you have two or more incoming lines, 
the phones can be wired to Line 1, Line 2 or even both lines for dual line 
phones.

Prior to adding a TalkSwitch, all phones in the home ring in unison when a 
call comes in. Home phones do not have TalkSwitch functionality and rely 
on phone company features for any enhancements.

Choose a wiring method (Option 1 or Option 2 below) that best suits your 
needs.

OPTION 1 — TalkSwitch phones separate from home phones
Advantages

Easy to set up. May not require any wiring changes when used with one 
incoming line.

You can still use some of TalkSwitch’s features from the home phones. 

Disadvantages

Your home phones and office phones are not fully integrated together. 
For example, calls to the office cannot be forwarded to the home phones.

Home phones don’t have access to voicemail and other TalkSwitch 
features. 

All phones ring at the same time for incoming calls.

D

Incoming phone lines

Residential building

LEGEND:

D

E

Summary of Contents for 48-CA/CVA




















































































































































































































































Reviews: