Suzuki SFV650, Service Manual

Page: 488 / 573

5B-14 Manual Transmission:
2) Loosen the lock-nuts (1).
3) Turn the gearshift link rod (2) until the gearshift lever
is 45 – 55 mm (1.8 – 2.2 in) below the top of the
footrest.
4) Tighten the lock-nuts securely.
Gearshift Shaft / Gearshift Cam Plate
Components
B944H15206012
Gearshift Construction
B944H15206013
Gearshift Shaft / Gearshift Cam Plate Removal
and Installation
B944H15206014
Removal
1) Disengage the gearshift lever link arm (1) by
removing the bolt.
NOTE
Mark the gearshift shaft head at which the
gearshift link arm slit set for correct
reinstallation.
2) Remove the engine sprocket outer cover. Refer to
“Engine Sprocket Removal and Installation in
Section 3A (Page 3A-2)”.
3) Remove the clutch components. Refer to “Clutch
Removal in Section 5C (Page 5C-7)”.
1. Gearshift shaft
2. Gearshift cam drive plate
3. Gearshift cam plate
4. Gearshift cam stopper
: 10 N
⋅
m (1.0 kgf-m, 7.0 lbf-ft)
: 13 N
⋅
m (1.3 kgf-m, 9.5 lbf-ft)
: 19 N
⋅
m (1.9 kgf-m, 13.5 lbf-ft)
: Apply thread lock to thread part.
: Apply thread lock to thread part.
: Apply grease to oil seal lip.
: Do not reuse.
1
1
2
I944H1520047-01
(a)
1
2
3
4
(b)
(c)
I944H1520072-01
1. Gearshift shaft
2. Snap ring
3. Gearshift shaft return spring
4. Gearshift plate return spring
: Apply thread lock to thread part.
: Do not reuse.
1
2
2
4
3
I944H1520070-02
1
I944H1520048-01