Suzuki SFV650, Service Manual

Page: 319 / 573

Fuel System: 1G-7
3) First, check for insulation with the tester between
terminals “A” and “B”. Next, check for continuity
between “A” and “B” with 12 V voltage applied,
positive (+) to terminal “C” and negative (–) to
terminal “D”. If continuity does not exist, replace the
relay with a new one.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity test (
)
4) Reinstall the removed parts.
Fuel Hose Inspection
B944H11706005
Refer to “Fuel Line Inspection in Section 0B (Page 0B-
10)”.
Fuel Hose Removal and Installation
B944H11706017
WARNING
!
• Keep away from fire or spark.
• Spilled gasoline should be wiped off
immediately.
• Work in a well-ventilated area.
Removal
1) Lift and support the fuel tank. Refer to “Fuel Tank
Removal and Installation (Page 1G-7)”.
2) Place a clean rag under the fuel feed hoses (1).
3) Disconnect the fuel feed hoses (1) from the fuel
delivery pipe and fuel pump.
4) Remove the fuel hose (1).
Installation
1) Install the fuel hose as shown in the intake system
construction. Refer to “Throttle Body Construction in
Section 1D (Page 1D-8)”.
NOTE
Connect the fuel feed hoses to the fuel pump
and fuel delivery pipe until its locks securely
(a click is heard).
2) Install the fuel tank. Refer to “Fuel Tank Removal
and Installation (Page 1G-7)”.
Fuel Level Gauge Inspection
B944H11706007
Refer to “Fuel Level Gauge Inspection in Section 9C
(Page 9C-5)”.
Fuel Tank Removal and Installation
B944H11706010
Removal
WARNING
!
• Keep away from fire or spark.
• Spilled gasoline should be wiped off
immediately.
• Work in a well-ventilated area.
1) Remove the seat. Refer to “Exterior Parts Removal
and Installation in Section 9D (Page 9D-4)”.
2) Remove the fuel tank mounting bolts (1).
“A”
“B”
“C”
“D”
I718H1170013-01
1
1
I944H1170008-02
1
I944H1170009-02
1
I944H1170010-03