Suzuki SFV650, Service Manual

Page: 371 / 573

Exhaust System: 1K-5
14) Remove the HO2 sensor (15).
CAUTION
!
• Be careful not to expose the HO2 sensor to
an excessive shock.
• Be careful not to twist or damage the HO2
sensor lead wire.
15) Remove the muffler cover (16) by removing the bolts
(17).
Installation
Installation is in the reverse order of removal. Pay
attention to the following points:
CAUTION
!
Replace the exhaust pipe gaskets and
exhaust connectors with new ones.
• Tighten the muffler cover bolts (1) to the specified
torque.
Tightening torque
Muffler cover bolt (a): 5.5 N·m (0.55 kgf-m, 4.0 lbf-
ft)
• Tighten the HO2 sensor (2) to the specified torque.
Tightening torque
HO2 sensor (b): 25 N·m (2.5 kgf-m, 18.0 lbf-ft)
CAUTION
!
• Apply anti seize compound (Never-seez
purenickel special) to the HO2 sensor.
• Be careful not to expose the HO2 sensor to
an excessive shock.
• Do not use an impact wrench when
installing the HO2 sensor.
• Be careful not to twist or damage the HO2
sensor lead wire.
15
I944H11B0013-03
17
I944H11B0014-04
16
17
I944H11B0015-04
(a)
1
I944H11B0016-02
(a)
1
I944H11B0017-02
(b)
2
I944H11B0018-02