Fuel System: 1G-11
3) Remove the fuel pressure regulator assembly (4).
4) Disconnect the fuel pump (+) lead wire (5).
5) Remove the fuel pump assembly (6).
6) Remove the fuel mesh filter (7).
7) Remove the fuel pump (8).
8) Disconnect the lead wires (9).
9) Remove the joint (10).
CAUTION
!
Never remove the fuel pressure regulator (11)
from the holder.
Assembly
Refer to “Fuel Mesh Filter Inspection and Cleaning
(Page 1G-12)”.
Assemble the fuel tank pump in the reverse order of the
disassembly. Pay attention to the following points:
CAUTION
!
• The removed fuel pump lead wire and fuel
level gauge lead wire must be replaced
with the new ones.
• To prevent fuel leakage, each O-rings must
be replaced with new ones.
• Apply engine oil lightly to each of the O-
rings.
NOTE
Connect all lead wires securely so as not to
cause contact failure.
4
I944H1170022-02
6
5
I944H1170023-02
7
I944H1170024-02
8
9
I944H1170025-02
10
11
I944H1170026-02
1
2
I944H1170027-01
Summary of Contents for SFV650
