Stanford Research Systems SR785, Operating Manual And Programming Reference

Page: 463 / 546

Input Commands 5-63
SR785 Dynamic Signal Analyzer
EU2M (?) d {,i}
The EU2M command sets (queries) the Ch2 Engineering Units Mode for display
d The set command requires d = 2 (both displays).. The parameter i selects Off
(0) or On (1).
EU2L (?) d {,i}
The EU2L command sets (queries) the Ch2 Engineering Units Label for display
d. The set command requires d = 2 (both displays). The parameter i selects the
unit label.
i Label i Label
0 m/s
2
8 kg
1 m/s 9 lbs
2 m 10 N
3 in/s
2
11 dyne
4 in/s 12 Pas
5 in 13 bar
6 mil 14 USER
7 g
EU2V (?) d {,x}
The EU2V command sets (queries) the Ch2 Engineering Units per Volt scale for
display d. The set command requires d = 2 (both displays). The parameter x is
real number of EU/Volt (EU’s per Volt).
EU2U (?) d {,s}
The EU2U command sets (queries) the Ch2 User Label for display d. The set
command requires d = 2 (both displays). The string s is the user label.
TD2C (?) d {,i}
The TD2C command sets (queries) the Ch2 Transducer Conversion. for display
d. The set command requires d = 2 (both displays). The parameter i selects the
units to be converted to:
i Label
0 m/s
2
1 m/s
2 m
3 in/s
2
4 in/s
5 in
6 mil
7 g