Stanford Research Systems SR785, Operating Manual And Programming Reference

Page: 388 / 546

4-192 System Menu
SR785 Dynamic Signal Analyzer
Date/Time
Display the [System] <Date/Time> menu. Press <Return> or [System] for the
[System] menu.
Diagnostics
Display the [System] <Diagnostics> test menu. Press <Return> or [System] for
the [System] menu.
Macro
Use the knob to pick one of the ten Macros to edit and press [Enter]. All macros
may be edited including those which have not been recorded.
See ‘Macros’ in Chapter 3 for more.
Edit Macro
Display the Edit Macro menu to edit the selected macro. Press <Cancel> to exit
back to the main [System] menu.
It is generally easier to record a macro than it is to enter it in this menu. Use this
menu to edit existing macros. See ‘Macros’ in Chapter 3 for more.
To enter a macro string, enter Menu, Function, Control and Number keys by
simply pressing the desired key (these keys do not have their normal effect in
this menu) . Use <Special Keys> and the knob to select <Softkeys> and [Enter].
[<-] (Backspace) deletes the term before the cursor.
To edit a macro string, use <Macro String> and the knob to move the flashing
cursor within the string. <Delete> will delete the highlighted term. Menu,
Function, Control and Number keys and <Special Keys> will either insert or
replace at the cursor. Use <Insert/Replace> to switch between insert and replace
mode. <Clear Macro> will delete the entire string.
To increase (CW) or decrease (CCW) a knob event, use <Inc. Knob Count> and
<Dec. Knob Count>.
<Cancel> will discard any changes made in this menu and exit this menu.
<Enter Macro> will enter the new macro and exit this menu. Pressing [Enter]
while the cursor is in the macro string display also enters the macro and exits this
menu.