52
5.10.14
Date
current date
(m/d/y) 01/04/10
If incorrect, enter the current date. This must be correct for proper credit card and email operation.
5.10.15
Day of the week
day of the week
¬
Monday
®
If incorrect set the current day. This must be correct for proper credit card and email operation.
5.10.16
Time
current time
(h:m) 10:45 AM
If incorrect set the current time. To toggle AM or PM use the numeric keypad while the cursor is
under the A or the P. This must be correct for proper credit card and email operation.
5.10.17
Sleep Settings
This setting allows you to automatically place the machine in a sleep mode (offline) during periods of
the day when you do not want it to be used or when it is not supposed to be used. One start time and
sleep duration time setting is available for each day of the week.
5.10.18
Limiting Administrative Access
This is used to control access to certain feature groups based on a PIN identification number. This
feature is used primarily when non-machine owners will have access to the machine. You can
program up to six PINs to allow access to be able to view or view and edit machine features.
5.10.19
Location ID
This setting is use to set a unique identifier for each machine. This number will show up on audit
reports to identify the location of the machine or can be used as a unique identifier for 3rd party card
or POS systems.
5.10.20
GXP network address
GXP network
address 0
In some configurations two machines can be networked together and share information. This is
usually done to share a POS system. An address of zero indicates that it is not networked. An address
of one indicates that it is connected directly to the POS system. Entering a two indicate that it will
verify it’s POS codes through GXP 1. Network address should not be duplicated.
5.10.21
GXP network last address
GXP network
