26
2
2
2
3
3
3
4
4
4
5
5
4 & 1
6
6
4 & 2
7
7
4 & 3
8
8
4 & 3 & 1
These are the Y1 through Y8 outputs on the PLC. Note that the standard PLC only has Y1 through
Y4. If you need Y5 through Y8 a separate module must be purchased.
5.3.8
Wash equipment signal time
vend duration
time 1 secs
The length, in seconds, that the wash signal will be active to the car wash equipment.
5.3.9
A la carte signal duration
a la carte duration
<vend cycle>
·
Vend Cycle
– The
A la carte
signal will be on until the end of the wash signal is received
·
Timed
– Selecting this will allow an entry in seconds for the length of all
A la carte
signals.
5.3.10
Entry message timeout
entry message
timeout 10 secs
The time in seconds that a driver will be prompted to pull forward.
5.3.11
Entry Delay
entry delay
time 1 secs
This feature is used to increase the amount of time the “Exit Prompt” will be displayed. It is
particularly useful in the following circumstances:
§
If the Wash Bays has a
purging cycle
that occurs after the washed car has exited the bay. In this
example there may be a long delay before the next car (stacked car) is supposed to enter the bay.
Note – if the machine is equipped with a proximity sensor the Exit Prompt will shutoff as soon
as the stacked car is no longer in front of the machine, regardless of the Exit Delay time.
5.3.12
Stacking cars
car stacking
<single>
