37
5.5.5
Clearing a Book Of Codes
clear Book Of Codes
report?
Press
YES
to clear all of the Book Of Codes sold at this machine.
This is only available if you have Code Command II selected under POS Settings.
5.6
Auxiliary Output Settings
This menu lets you set parameters for controlling a generic output. This output can be used to control
an external gate.
5.6.1
Will the machine control a gate?
Issue aux out with
Button output? NO
YES
- The machine will output a signal.
NO
– The machine will not output a signal.
5.6.2
Will there be a feedback signal provided?
Is a feedback
signal used? NO
YES
- The machine will output a signal until a feedback signal is received.
NO
- A timed output signal will be sent as set below.
5.6.3
Gate out signal time
Aux output vend
time 1 secs
The time, in seconds, that the auxiliary out signal from the PLC will be active. The auxiliary out
signal goes out at the same time as the wash signal.
5.7
Card and Bill Fast Vend Settings
The machine is equipped with a feature that can detect unusual and excessive machine activity,
usually indicative of fraudulent activity. This feature is called Fast Vend Shut Off. The machine will
detect that the frequency of use is unusually high for a pre-determined period of time, and shut itself
down for enough time to deter the thief. See the following paragraphs to learn how to set the number
of deposits allowed, the time period they are allowed in, and the time the machine will be shut off if
this feature is activated.
There are separate settings for bills and cards. To see the Bill Fast Vend Settings you must have a
bill acceptor connected. To see the Card Fast Vend Settings you must have a card system selected in
Credit Settings.