60
Step 2
– Identify the
number
of different coupons to be accepted.
Each coupon trained in the acceptor is considered a
different
coupon. Step down into the menu until
you see [maximum number] on the top line of the display and [of coupons] on the bottom line. Enter
the number of different coupon types you plan to use. It is not unusual to use only one coupon type.
Up to four different coupon types can be used. Setting this to zero will bypass setting up coupons.
Step down in the menu after answering this question.
Step 3
- Setup a custom
name
for each different coupon type accepted.
Each coupon type has a
generic label
and a
name
associated with it. The default
name
assigned to
each coupon type is the same as the
generic label
. Changing the name can make it easier to
distinguish one coupon discount from another when you are viewing the associated audit. The audit
totals will be listed under the
name
of the discount type, not the
generic label
. The top line of the
display will now show [coupon 1 name], which is the
generic label
for this discount. The generic
label cannot be changed, The bottom line of the display will show [COUPON 1]. The cursor will be
flashing under the first character of the
name
. You can now change the name using the text entry
method.
Step down in the menu after answering this question.
Step 4 –
Select if the coupon can give credit towards a wash package or it will give a discount to a
wash package.
§
If you select YES multiple coupons can be used towards the purchase of any wash package. This
coupon will not show up as a selection in
Promotion Settings
, but it can be used towards the
purchase of a wash package in a promotion. Next you must enter a value this coupon is worth. If
cancel is pressed the user will not get change back for this credit.
§
If you select NO only one coupon will give a discount to a wash package. If cancel is pressed the
user will not get change back for this discount.
Step down in the menu after answering this question.
Step 5
–
Associate
the coupon to the
generic label
you want to use for it.
The display will now show [coupon 1] on the top line of the display. The bottom line of the display
will indicate if a coupon has already been
associated
with the
coupon 1
position. If the coupon has
already been
associated
for this position the bottom line of the display will show [programmed]. If
you are changing a coupon that was previously programmed in this position (coupon 1) or you are
programming a new coupon in this position, then deposit one of the coupons into the bill acceptor at
this time. Within a few seconds the bottom line of the display will show [programmed]. This
indicates that the coupon is now associated with this position (generic label & name).
Press the down button to go to the next coupon at step 3
