28
Enter the number of times to ignore a missed feedback signal before a Wash Equipment error occurs.
The count is decremented if a Cycle Inhibit signal is not seen within the Wash Bay Busy timeout.
When the count reaches zero a Wash Equipment Error is generated. If you set the count to zero a
Wash Equipment error will occur immediately.
5.3.18
Delaying the wash signal
wash signal delay
0 secs
Enter a delay in seconds before the wash signal is sent to allow for a receipt printout.
5.3.19
When to prompt users to upgrade their wash
Use upgrade timer
< never >
·
never –
the user will never be prompted to upgrade his wash.
·
always
– the user will always be prompted to upgrade his wash.
·
stacked
– users will only be prompted to upgrade their wash if they are stacked.
The
benefit
of this feature is that it will allow the operator every possible chance to Upsell their wash
services to the user thereby potentially generating more revenue per customer. To accomplish this
every user regardless of their payment method (cash, credit or pre-paid code) will be provided an
opportunity to upgrade their wash package or add an A La Carte service (Ex: RainX) to their initial
selection. The Upsell time will be operator programmable. Users who wish to skip the Upsell time
will be prompted via voice message to press the "ENT" button on the keypad.
5.4
POS Settings
The POS systems supported are the Unitec POS4000, Code Command I Wired, Code Command II
Internet, Code Command II Encrypted and Code Command II Wired. You should always contact
your POS manufacturer with any questions regarding the operation of the POS terminal, the reports
that are available through the terminal and for setup questions.
The POS system will show up in the configuration report if communication is active. If no
communication occurs after 30 seconds a COMM LOST from POS code will occur.
Note-Synchronize the POS audit to the machine audit by clearing both the POS terminal audit
and machine audit at the same time.
5.4.1
The POS type you are connecting to
POS type
< NONE >
