72
Exact Change
– Exact Change Active is sent if all dispensers are sold out or in error. Exact Change
Not active is sent if one or more dispensers become not sold out or in error.
Door Status
– A door switch kit can be connected at J6 to monitor when the GXP door is opened
and closed.
Reset Pressed
– Only sent if the reset button on the GXP is pressed.
Power Returned
– Only sent when power returns to the GXP.
Credit Card Low
– This will send an alarm when the number of cash transactions with out a credit
transaction exceeds the “card usage” setting under credit settings. As an example the default setting is
20. If 20 cash transactions occur with out a single credit card transaction occurring the alarm will be
sent. When a credit transaction occurs the credit card usage normal alarm will be sent.
Bill Acceptor Error
– Any bill acceptor error.
Printer Error
– Sent if the printer runs out of paper.
Fast Vend
– This will send an alarm if the Bill Fast Vend levels are exceeded. A Bill Fast Vend
error will take the GXP Out Of Service and will require a reset to remove the error. The Bill Fast
Vend levels can be changed in “CARD AND BILL FAST VEND SETTINGS”.
Card Reader Communication
– "card reader communication bad” is sent if communication is lost
to the card reader. "card reader communication good” is sent when communication returns.
Card System Communication
- "card system communication bad” is sent if communication is lost
to the card system. "card system communication good” is sent when communication returns.
5.15.3
Reports
The sending of reports default to NO. If you wish to receive a report press the YES button (number
9). The reports being sent are the same as the reports viewed and printed at the GXP.
Resettable Audit
– This is the same summary audit that can be viewed or printed at the GXP. If the
report is cleared at the GXP then the report that you receive will be cleared.
Perpetual Audit
– This is the same summary audit that can be viewed or printed at the GXP. This
can only be cleared at the factory. Eventually the numbers will rollover at 10,000. You will have to
do the math accordingly.
Promotion Audit
– This is the same as the Summary Promotional Audit at the GXP.
5.15.4
Enable Account
Please enable the account to receive any of the reports and alarms that you have set. The sending of
reports and alarms to an account will be turned off if this is set to NO.
