background image

 

 

 

                                                        ITEM # UVC9   

 

Ultraviolet Water Clarifier 

                                               

 

PACKAGE CONTENTS 

 

 
 
 
 
 
 

 
 
 
 
 
 
 
 
 

  WARNINGS AND CAUTIONS 

WARNING 

 

WARNING – Improper connection of the appliance-grounding conductor can result in a risk of electric 
shock. Check with a qualified electrician or service representative if you are in doubt whether the 
appliance is properly grounded. Do not modify the plug provided with the appliance; if it will not fit the 
outlet, have a proper outlet installed by a qualified technician. 

 

Do not operate any appliance if it has

 

a damaged cord or plug, or if it is malfunctioning or

 

if it is 

damaged in any manner.  

 

Always unplug the appliance from the outlet before putting on or taking off parts, before cleaning or 
when not in use. 

 

Connect only to a circuit that is protected by a ground-fault circuit-interrupter (GFCI). 

 

Risk of Electric Shock: Do not use the UV filter if the quartz tubing around the lamp is broken. 
Immediately unplug and seek an authorized repair service or discard the unit. 

 

GROUNDING INSTRUCTIONS – This appliance must be grounded. In the event of a malfunction or 
break down, grounding will reduce the risk of electric shock by providing a path of least resistance for 
electric current. This appliance is equipped with a cord having an appliance-grounding conductor and a 
grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in 
accordance with all local codes and ordinances. 

CAUTION 

 

UV light may cause irritation to the skin and/or eyes.  Avoid exposure.  

 

DANGER – ULTRAVIOLET RADIATION – disconnect power before replacing lamp. 

 

Prolonged or repeated exposure to UV light may have adverse physical effects including, severe 
damage to your skin and eyes.  Seek immediate medical attention for overexposure to UV radiation. 

 

Keep the cord away from high temperatures or other heat sources. 

 

Do not lift the light or the transformer by its power cord. 

 

This light assembly has not been investigated for use in swimming pools or hot tubs. 

 

Part 

Description 

Quantity 

UV light 

Adapter gasket  

Adapter 

Adapter nut 

 

Questions, problems, missing parts? 

Before returning 

to your retailer, call our customer service department at  
1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or 
email us at [email protected].  Or 
visit our website www.totalpond.com. 

 

 

REMINDER 

CALL 1-888-412-6001 

BEFORE RETURNING TO STORE. 

 

Summary of Contents for UVC9








Reviews: