Sparc S7-2L, Service Manual

Page: 102 / 160

Enable and Verify a DIMM
# fmadm faulty
If any faults are reported, refer to the diagnostics instructions described in “Identify
Faulted Components” on page 28 .
5. Switch to the Oracle ILOM command shell.
6. Type:
-> show faulty
Target | Property | Value
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0 | fru | /SYS/MB/CMP1/MCU0/CH1/D0
/SP/faultmgmt/0 | timestamp | Dec 14 22:43:59
/SP/faultmgmt/0/ | sunw-msg-id | SUN4V-8000-DX
faults/0 | |
/SP/faultmgmt/0/ | uuid | 3aa7c854-9667-e176-efe5-e487e520
faults/0 | | 7a8a
/SP/faultmgmt/0/ | timestamp | Dec 14 22:43:59
faults/0 | |
If the output reports a fault with a UUID go to Step 7 . If the output does not report a fault with a
UUID, you are done with the verification process.
7. Switch to the system console and type the
fmadm repair
command with the UUID.
Use the same UUID that was displayed from the output of the Oracle ILOM
show faulty
command.
# fmadm repair 3aa7c854-9667-e176-efe5-e487e520
Related Information
■
“DIMM Configuration” on page 93
■
“DIMM FRU Names” on page 94
■
“Locate a Failed DIMM (LEDs)” on page 95
■
“Locate a Failed DIMM (Oracle ILOM)” on page 96
102 SPARC S7-2L Server Service Manual • March 2017