Sparc S7-2L, Service Manual

Page: 40 / 160

Configure POST
Properties:
default_level : Diag level in the default cause (no error or hw change)
default_level : Possible values = off, min, max
default_level : User role required for set = r
default_verbosity : Diag verbosity in the default cause (no error or hw
change)
default_verbosity : Possible values = none, min, normal, max
default_verbosity : User role required for set = r
error_level : Diag level when running after an error reset
error_level : Possible values = off, min, max
error_level : User role required for set = r
error_verbosity : Diag verbosity when running after an error reset
error_verbosity : Possible values = none, min, normal, max
error_verbosity : User role required for set = r
hw_change_level : Diag level when running after a hw change
hw_change_level : Possible values = off, min, max
hw_change_level : User role required for set = r
hw_change_verbosity : Diag verbosity when running after a hw change
hw_change_verbosity : Possible values = none, min, normal, max
hw_change_verbosity : User role required for set = r
->
Note - When the verbosity value is set to none , the console might not display any POST test
status for extended periods of time on certain configurations.
3. (Optional) Set the virtual keyswitch to determine the diagnostic level after an
error reset and after a hardware change.
To set
error_level
, to
max
, and to set
hw_change_level
to
max
, type:
-> set /HOST/diag error_level=max
-> set /HOST/diag hw_change_level=max
Refer to the section on setting the SPARC host keyswitch state in the Oracle ILOM
Administrator’s Guide for Configuration and Maintenance Firmware Release 3.2.x for a
description of parameters and values.
4. View the current values for settings.
For example:
-> show /HOST/diag
40 SPARC S7-2L Server Service Manual • March 2017