Sparc S7-2L, Service Manual

Page: 109 / 160

Servicing the eUSB Drive
The eUSB drive is mounted on the motherboard towards the front on the power supply side.
These topics describe how to service the eUSB drive.
■
“Install the eUSB Drive” on page 111
■
“Remove the eUSB Drive” on page 109
Related Information
■
“Detecting and Managing Faults” on page 27
Remove the eUSB Drive
You can perform this cold-service procedure. Power down the server completely before
performing this procedure.
Caution -
This procedure requires that you handle components that are sensitive to ESD. This
sensitivity can cause the components to fail. To avoid damage, ensure that you follow antistatic
practices as described in “Prevent ESD Damage” on page 54 .
1. Prepare the system for service.
See “Preparing for Service” on page 45 .
2. Remove the screw that attaches the eUSB drive to the motherboard.
Servicing the eUSB Drive 109