Sparc S7-2L, Service Manual

Page: 54 / 160

Accessing Server Components
Related Information
■
“Safety Information” on page 45
■
“Power Off the Server (Oracle ILOM)” on page 52
■
“Power Off the Server (Server Power Button - Graceful)” on page 52
■
“Power Off the Server (Emergency Shutdown)” on page 53
■
“Rear Panel Components” on page 19
Accessing Server Components
These topics explain how to access components on the outside and the inside of the server.
Perform these tasks in this order, as needed.
■
“Prevent ESD Damage” on page 54
■
“Extend the Server to the Service Position” on page 55
■
“Release the CMA” on page 56
■
“Remove the Server From the Rack” on page 58
■
“Remove the Top Cover” on page 59
■
“Remove the Air Baffle” on page 60
■
“Remove the Fan Cover” on page 60
Related Information
■
“Safety Information” on page 45
Prevent ESD Damage
Many components housed within the chassis can be damaged by ESD. To protect these
components from damage, perform the following steps before opening the chassis for service.
1.
Prepare an antistatic surface to set parts on during the removal or installation
process.
Place ESD-sensitive components such as the printed circuit boards on an antistatic mat. The
following items can be used as an antistatic mat:
■
Antistatic bag used to wrap a replacement part
54 SPARC S7-2L Server Service Manual • March 2017