Sparc S7-2L, Service Manual

Page: 52 / 160

Power Off the Server (Oracle ILOM)
Power Off the Server (Oracle ILOM)
You can use the SP to perform a graceful shutdown of the server, and to ensure that all of your
data is saved and the server is ready for restart.
Note -
Additional information about powering off the server is provided in the SPARC S7-2
Series Servers Administration Guide .
1.
Prepare to power off the server.
See “Prepare to Power Off the Server” on page 51 .
2. Switch from the system console to the Oracle ILOM prompt by typing the
#.
(Hash-Dot) key sequence.
3.
Power off the server.
-> stop /System
Note -
You can also use the Server Power button on the front of the server to initiate
a graceful server shutdown. (See “Power Off the Server (Server Power Button -
Graceful)” on page 52 .)
Related Information
■
“Prepare to Power Off the Server” on page 51
■
“Power Off the Server (Server Power Button - Graceful)” on page 52
■
“Power Off the Server (Emergency Shutdown)” on page 53
■
“Front Panel Components with Eight Drives” on page 11
Power Off the Server (Server Power Button -
Graceful)
This procedure places the server in the power standby mode. In this mode, the Power OK LED
blinks rapidly.
1. Prepare to power off the server.
See “Prepare to Power Off the Server” on page 51 .
52 SPARC S7-2L Server Service Manual • March 2017