Sparc S7-2L, Service Manual

Page: 31 / 160

Identify Disabled Components
1.
At the Oracle ILOM prompt, type:
-> show disabled
Target | Property | Value
-----------------------------------+----------------+--------------------
...
/SYS/MB/CMP0/MCU0/CH0/D0 | disable_reason | Configuration Rules
...
2. For additional information about a disabled component, type the
show -t
command and the Oracle ILOM target.
See “Component Names Displayed by Diagnostic Software” on page 31 .
For example:
-> show -t /SYS/MB/CMP0/MCU0/CH0/D0
Target | Property | Value
-----------------------------------+------------------------+------------
...
/SYS/MB/CMP0/MCU0/CH0/D0 | type | DIMM
/SYS/MB/CMP0/MCU0/CH0/D0 | ipmi name | P0/M3/B0/C1/D0
/SYS/MB/CMP0/MCU0/CH0/D0 | requested_config_state | Enabled
/SYS/MB/CMP0/MCU0/CH0/D0 | current_config_state | Enabled
/SYS/MB/CMP0/MCU0/CH0/D0 | disable_reason | Configuration Rules
/SYS/MB/CMP0/MCU0/CH0/D0 | fru_name | 8192MB DDR4 SDRAM DIMM
...
Related Information
■
“Log In to Oracle ILOM (Service)” on page 28
■
“Identify Faulted Components” on page 28
■
“Component Names Displayed by Diagnostic Software” on page 31
Component Names Displayed by Diagnostic
Software
Use the information in this table to identify the name of a component that requires service.
Component Oracle ILOM Target Links
Battery
/SYS/MB/BAT
“Servicing the Battery” on page 113
DIMMs on motherboard
/SYS/MB/CMP[0-1]/MCU[0-1]/
CH[0-1]/D[0-1]
“Servicing DIMMs” on page 93
Detecting and Managing Faults 31