Sparc S7-2L, Service Manual

Page: 55 / 160

Extend the Server to the Service Position
■
ESD mat
■
Disposable ESD mat (shipped with some replacement parts or optional components)
2. Attach an antistatic wrist strap.
When servicing or removing server components, attach an antistatic strap to your wrist and then
to a metal area on the chassis.
See
“Safety Information” on page 45 .
Related Information
■
“Safety Information” on page 45
Extend the Server to the Service Position
You can service the following components with the server in the service position:
■
Drives or fillers
■
Power supplies
■
Fans
■
DIMMs
■
PCIe cards
■
eUSB drive
■
Battery
Note -
You can replace the drives and rear power supplies without extending the server into the
service position.
1. Verify that no cables will be damaged or will interfere when the server is
extended.
Although the CMA that is supplied with the server is hinged to accommodate extending the
server, you should ensure that all cables and cords are capable of extending.
2. From the front of the server, release the two slide release latches.
Preparing for Service 55