Sparc S7-2L, Service Manual

Page: 29 / 160

Identify Faulted Components
1. From the Oracle ILOM prompt, start the fault management shell and type
fmadm
faulty
.
This example shows how to check for faults through the Oracle ILOM fault management shell.
You can also check for faults by typing
show faulty
at the Oracle ILOM prompt.
-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
faultmgmtsp>
fmadm faulty
------------------- ------------------------------------ -------------- -------
Time UUID msgid Severity
------------------- ------------------------------------ -------------- -------
2016-01-16/17:55:26 f4ee56c-9fdd-ca19-efb5-ae39675dfee3 SPT-8000-PX Major
Problem Status : open
Diag Engine : fdd 1.0
System
Manufacturer : Oracle Corporation
Name : SPARC S7-2L
Part_Number : 111+1
Serial_Number : 1238BDC0DF
----------------------------------------
Suspect 1 of 1
Fault class : fault.component.misconfigured
Certainty : 100%
Affects : /SYS/MB/CMP0/MCU1/CH0/D0
Status : faulted
FRU
Status : faulty
Location : /SYS/MB/CMP0/MCU1/CH0/D0
Manufacturer : Hynix Semiconductor Inc.
Name : 8192MB DDR4 SDRAM DIMM
Part_Number : 70xx001,HMA4xxR7MFRxx-TFT7
Revision : 01
Serial_Number : 02xxx102WR
Chassis
Manufacturer : Oracle Corporation
Name : SPARC S7-2L
Part_Number : 113+2
Serial_Number : 1248DC140
Description : A FRU has been inserted into a location where it is not
supported.
Response : The service required LED on the chassis may be illuminated.
Detecting and Managing Faults 29